400 LT. SICAK DALDIRMA GALVANİZLİ ÇÖP KONTEYNERİ
TEKNİK ÖZELLİKLERİ ve RESMİ
- Gövde 2.00 mm. tek parça sacdan kıvrılıp, gövde ve yanlar preslenerek mukavemeti arttırılmıştır.Gövde yanı 1.50 cm. bükülerek, gövdeyi dıştan kavrayıp taban köşeler ve üst arka ağız radüslüdür.
- Konteyner ağız profilleri kendinden bükümlü, 25 x 50 mm. ebadında kaynaksızdır.Yalnız köşe birleşim yerleri kaynatılmıştır.
- Gövde komple gazaltı kaynağı ile cürufsuz kaynatılmıştır.
- Kaldırma kulakları 4.00 mm. gövdeye takviyeli kaynaklıdır.Yanlarda taşıma kulpu mevcuttur.
- Kapak 1.50 mm. tek parça sacdan sıvanarak, mukavemetli ve estetik olması sağlanmıştır.
- Kapakta açma kulpu, dayama ile kilit olup, içten mukavemet artırıcı profil takviyelidir.
- Taşıyıcı 4 adet 150 x 45 ebadında 2 adeti 360º dönerli, 2 adeti sabit ve maşa sacı 3.00 mm. olan TS EN 12532 standardına uygun teker mevcuttur.Teker bağlantı ayak sacı 3.00 mm.’dir.
- Konteyner, teknik özelliklere ve teknik resme uygun imal edilerek komple Sıcak Daldırma Galvanizleme Sistemi ile TS EN ISO 1461 standardına uygun 60-80 mikron galvanizlenmiştir.
- Konteyner TS EN 840-2 standart uygunluk belgelidir.
- Ön yüzeye belediye ismi, çöp atan insan figürü ve ‘Çevremizi Temiz Tutalım ‘ sloganı yazılır.
400 LT. HOT DIP GALVANIZED WASTE CONTAINER
TECHNICAL FEATURES & PICTURE
1. The body is twisted from a single piece of 2.00 mm. thick iron sheet; resistance of the body and sides increased in presser.Side of the body is twisted 1,50 cm. so that it grasps the body from outside; the ground, corners and upper back opening are provided round shape.
2. Container opening profiles are self-twisted as 25x50 mm. and non welding.Just the mountings of the corners are welded.
3. The body is welded completely with gasous welding and without any dross.
4. The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement. At sides carrying handles are existed.
5. The lid is laminated by a single piece of 1,50 mm. thick iron sheet to make it durable and aesthetic.
6. Opening handles on the lid, locked with osculation, reinforced with resistance increasing profile from inside.
7. There are 4 carrying rollers, with a size of 150 x 45, two of them are swivel 360º, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standars of
TS EN 12532.Thickness of the wheel mounting bracket is 3.00mm.
8. Container is produced in accordance with technical pictures and technical specialties, galvanized in accordance with the standard of
TS EN ISO 1461 with the system of hot dipping galvanization 60-80 micron.
9. Container has the certificate of
TS EN 840-2.
10. In the front side; the name of the municipality, a drawing which shows a person throwing garbage and the slogan 'Keep Clean Our Environment' are applied.